3 minutes reading time (520 words)

Protecting servers with Biometric Access Control

  • STANLEY Security
  • 0 Comments

STANLEY Security, one of the UK’s leading security providers, has installed a biometric access control system at beverage company Finlays’ Pontefract site to protect its server rooms.

 

A company with over 265 years heritage, Finlays owns and operates tea estates, extraction facilities for tea, coffee and plant extracts, packing facilities and R&D laboratories across four continents.

Finlays already had a PAC access control system in place for exterior doors, and number code locks were fitted to the doors of their server rooms but, reviewing security, Finlays wanted to improve the level of security for the latter.  The key requirement was to ensure access to the server rooms be controlled by Finlays IT department only.  IT staff work standard office hours so should access be required to the server rooms outside of this, the code for the locks would have to be shared with others or a member of the IT team would have to return to site.

Finlays had ruled out a card/tag based access control system due to the inherent issues with lost, stolen or borrowed cards, and had decided a biometric system would be the right solution for them.  A number of security companies were approached, including STANLEY Security, which were awarded the contract.  “It’s a name we knew and we have a lot of STANLEY product on site,” states Stephen Firth, Finlay’s Group Senior IT Support Engineer.  “We also have a PAC system which shares the same software that the STANLEY biometric system runs on, so it meant we could easily add to the existing system and view both using the same software, although they are run as stand alone systems for added security.”

STANLEY Security installed ievo® biometric fingerprint readers to four server room doors at Finlays.  The system features advanced image reading sensors that take a detailed scan of a finger from the surface and subsurface levels of the skin, to capture a highly accurate digital image whilst protecting against fake and spoof fingerprints.  Specific data from the image is converted into a digital template used for fingerprint identification. Providing a user presents a finger that matches a stored user template, then access will be granted.  ievo captures clear, clean images, even when surface features are absent or hard to distinguish due to age, dirt, finger pressure and skin or environmental conditions.

Finlays are pleased with the new biometric access control system as it provides the company with the security required but also convenience, as Stephen comments: “now, IT has full control of who enters the server rooms and there is an audit trail. We don’t have to worry about who has keys to the IT office and who knows the code for the server rooms door locks.  What’s more, IT can open any door on the system remotely should it be required, rather than having to return to site.  With one of the racks on our server belonging to someone else, that’s an important consideration should they need to gain access out of office hours.”

For more information on Access Control, please go to:

Biometric Access Control

Time & attendance systems

 

 

4 common growth pains for SME
What is a Time and Attendance System?
 

Comments

No comments made yet. Be the first to submit a comment
Guest
Thursday, 29 October 2020